M3000.05D / M3000.1D

M3000.05D / M3000.1D
STABLE TO: ½ ohm 1 ohm
CONTINUOUS (RMS) POWER @ 13.8 Volts:

M3000.05D : Watts @ .5 ohms mono 1 X 3000 N/A
M3000.1D   : Watts @ 1 ohms mono 1 X 1700 1 X 3000

Idle Current: 1.5 amp 1.5 amp
Signal to Noise Ratio A- Wtd : <85dB <85dB
Total Harmonic Distortion: 0.3% 0.3%
Channel Separation: N/A N/A
Input Sensitivity: 150mV-2.5V 150mV-2.5V
Slew Rate: 13V / Usec 13V / Usec
Fuse Rating / Dual: 100 amp 100 amp

General Information:
Frequency Response: <10Hz to 275Hz
Low- pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge
Dimensions:
Height: 2.25”
Width: 9.5”
Length: 13”
   
   

M2000.05D / M2000.1D / M2000.2D

M2000.05D / M2000.1D / M2000.2D
STABLE TO: ½ ohm 1 ohm 2 ohm
CONTINUOUS (RMS) POWER @ 13.8 Volts:

M2000.05D : Watts @ .05 ohms mono 1X 2000 N/A N/A
M2000.1D   : Watts @ 1 ohms mono 1 X 1100 1 X 2000 N/A
M2000.2D   : Watts @ 2 ohms mono 1 X 550 1 X 1100 1 X 2000


Idle Current: 1.5 amp

Signal to Noise Ratio A- Wtd : <85dB
Total Harmonic Distortion: 0.3%
Channel Separation: N/A
Input Sensitivity: 150mV-2.5V
Slew Rate: 13V / Usec
Fuse Rating: 100 amp

   

General Information:
Frequency Response: <10Hz to 275Hz
Low-pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 9.5”
Length: 10”

   
   

M1400.1D / M1400.2D

M1400.1D / M1400.2D
STABLE TO: 1 ohm 2 ohm
CONTINUOUS (RMS) POWER @ 13.8 Volts:

M1400.1D : Watts @ 1 ohms mono 1 X 1400 N/A
M1400.2D : Watts @ 2 ohms mono 1 X 750 1 X 1400


\Idle Current: 1.5 amp
Signal to Noise Ratio A- Wtd : <85dB
Total Harmonic Distortion: 0.3%
Channel Separation: N/A
Input Sensitivity: 150mV-2.5V
Slew Rate: 13V / Usec
Fuse Rating: 80 amp

General Information:
Frequency Response: <10Hz to 275Hz
Low-pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 9.5”
Length: 8”

   
   

M1000.1D / M1000.2D

M1000.1D / M1000.2D
STABLE TO: 1 ohm 2 ohm
CONTINUOUS (RMS) POWER @ 13.8 Volts:

M1000.1D : Watts @ 1 ohms mono 1 X 1000 N/A
M1000.2D : Watts @ 2 ohms mono 1 X 550 1 X 1000


Idle Current: 1.2 amp
Signal to Noise Ratio A- Wtd : <85dB
Total Harmonic Distortion: 0.3%
Channel Separation: N/A
Input Sensitivity: 150mV-2.5V
Slew Rate: 13V / Usec
Fuse Rating: 60 amp

General Information:
Frequency Response: <10Hz to 275Hz
Low-pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 9.5”
Length: 7”

   
   

M600.1D / M600.2D

M600.1D / M600.2D
STABLE TO: 1 ohm 2 ohm
CONTINUOUS (RMS) POWER @ 13.8 Volts:

M600.1D : Watts @ 1 ohms mono 1 X 600 N/A
M600.2D : Watts @ 2 ohms mono 1 X 350 1 X 600


Idle Current: 1.0 amp
Signal to Noise Ratio A- Wtd : <85dB
Total Harmonic Distortion: 0.3%
Channel Separation: N/A
Input Sensitivity: 150mV-5V
Slew Rate: 13V / Usec
Fuse Rating: 50 amp

General Information:
Frequency Response: <10Hz to 275Hz
Low-pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 9.5”
Length: 6”
   
   

 


SQ 4160

SQ4160 : POWER @ 13.8 Volts:

RMS @ 4 ohms stereo 4 X 160
RMS @ 2 ohms stereo 4 X 175
RMS @ 4 ohms mono 2 X 350

Idle Current: 1.5 amp
Signal to Noise Ratio A-Wtd: <100dB
Total Harmonic Distortion: 0.04%
Channel Separation: <80dB
Input Sensitivity: 150mV-5V
Slew Rate: 15V / Usec
Fuse Rating: 60 amp

General Information:
Frequency Response: <10Hz to 22KHz
Lowpass Filter: Variable 24db, 60 to 360Hz
Crossover: Lp / Hp / Off
Battery Connetors: 4 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 11.375”
Length: 19.375"
   
   

SQ 4100

SQ4100 : POWER @ 13.8 Volts:

RMS @ 4 ohms stereo 4 X 100
RMS @ 2 ohms stereo 4 X 110
RMS @ 4 ohms mono 2 X 220

Idle Current: 1 amp
Signal to Noise Ratio A-Wtd: <100dB
Total Harmonic Distortion: 0.04%
Channel Separation: <80dB
Input Sensitivity: 150mV-5V
Slew Rate: 15V / Usec
Fuse Rating: 30 amp

General Information:
Frequency Response: <10Hz to 22KHz
Lowpass Filter: Variable 24db, 60 to 360Hz
Crossover: Lp / Hp / Off
Battery Connetors: 4 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 11.375”
Length: 14.375”
   
   

SQ 2175

SQ2175 : POWER @ 13.8 Volts:

RMS @ 4 ohms stereo 2 X 175
RMS @ 2 ohms stereo 2 X 275
RMS @ 4 ohms mono 1 X 550

Idle Current: 1 amp
Signal to Noise Ratio A-Wtd: <100dB
Total Harmonic Distortion: 0.04%
Channel Separation: <80dB
Input Sensitivity: 150mV-5V
Slew Rate: 15V / Usec
Fuse Rating: 40 amp

General Information:
Frequency Response: <10Hz to 22KHz
Lowpass Filter: Variable 24db, 60 to 360Hz
Crossover: Lp / Hp / Off
Battery Connetors: 4 Gauge
Speaker Connectors: 8 Gauge

Dimensions:
Height: 2.25”
Width: 11.375”
Length: 14.375”